HP 6710b Service Manual
Top cover
Description
Spare part number
Top cover for use with HP Compaq 6715b and 6710b computer models (includes TouchPad and
cable and fingerprint reader)
443823-001
Top cover for use with HP Compaq 6715s and 6710s computer models (includes TouchPad and cable) 443822-001
Before removing the top cover, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4
.
Remove the battery (see
5
.
Remove the following components:
a
b
. Memory/WLAN module compartment cover (see
)
c
. Optical drive (see
)
d
. Keyboard (see
e
. Switch cover (see
f
.
)
Remove the top cover:
1
.
Turn the computer upside down, with the rear panel toward you.
2
.
Remove the thirteen Torx T8M2.5×9.0 screws (1) that secure the top cover to the computer.
ENWW
Component replacement procedures 81