HP 6710b Service Manual

15.4-inch, WSXGA+ display assembly for use with HP Compaq 6715b and 6710b computer models

with WWAN capability

443814-001

15.4-inch, WXGA display assembly for use with HP Compaq 6715b and 6710b computer models

with WWAN capability

443817-001

15.4-inch, WXGA, BrightView display assembly for use with HP Compaq 6715b and 6710b

computer models without WWAN capability

443816-001

15.4-inch, WSXGA+ display assembly for use with HP Compaq 6715b and 6710b computer models

without WWAN capability

443813-001

15.4-inch, WXGA display assembly for use with HP Compaq 6715b and 6710b computer models

without WWAN capability

443815-001

15.4-inch, WXGA, BrightView display assembly for use with HP Compaq 6715s and 6710s computer

models

443812-001

15.4-inch, WSXGA+ display assembly for use with HP Compaq 6715s and 6710s computer models 443818-001

15.4-inch, WXGA display assembly for use with HP Compaq 6715s and 6710s computer models

443819-001

Before removing the display assembly, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the computer.

Remove the battery (see 

Remove the memory/WLAN module compartment cover (see 

Disconnect the wireless antenna cables from the WLAN module (see 

).

Remove the following components:

. Keyboard (see 

. Switch cover (see 

Remove the display assembly:

Disconnect the display panel cable (1) from the system board.

76 Chapter 4   Removal and replacement procedures

ENWW