HP 6710b Service Manual

Switch cover for use with HP Compaq 6715b and 6710b computer models (includes power button

board and cable and LED board and cable)

443911-001

Switch cover for use with HP Compaq 6715s and 6710s computer models (includes power button

board and cable, but does not include LED board and cable)

443910-001

Before removing the switch cover, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the computer.

Remove the battery (see 

Release the keyboard (see 

).

Remove the switch cover:

Step 1 applies only to HP Compaq 6715b and 6710b computer models.

Release the ZIF connector (1) to which the LED board cable is attached and disconnect the LED board

cable (2) from the system board.

Insert a flat-bladed tool into one of the four slots (3) in the switch cover and lift the switch cover

(4) until it disengages from the computer.

Remove the switch cover.

Reverse this procedure to install the switch cover.

70 Chapter 4   Removal and replacement procedures

ENWW