HP (Hewlett-Packard) ML110 G6 User Manual

 

 

Diagnostics tools  93  

 

 

Field Description 

Exit Discarding Changes 

Discards changes made and closes the Setup Utility. 

Restore Default Settings 

Loads the factory-default settings for all Setup parameters. 
Keyboard shortcut: F9  

Discard Changes 

Discards all changes made to the Setup Utility and loads the previous configuration 
settings. 

Save Changes 

Saves all changes made to the Setup Utility. 

BIOS splash screen  

The BIOS splash screen displays basic and important information about the current server 

configuration and is necessary for troubleshooting and may be required when asking for technical 

support. It is recommended that you check this screen during the initial system setup and each time 
you install, remove, or upgrade accessories.  

To view the BIOS splash screen:   

You first need to enable the display of the splash screen during bootup. Follow the steps below.  

1. 

In the Main menu screen, select the Boot Features field, and then press Enter.  

2. 

Select the Splash Screen field.  

3. 

Press the plus (+) or minus (–) key to set the field to Enabled.  

4. 

Press F10 to save the changes you made and close the Setup Utility.  

5. 

Reboot the server.  
The splash screen is displayed briefly at the end of POST. 

 

 

6. 

Press the Pause/Break key to continue displaying the screen until another key is pressed. 

7. 

Press any key to continue with the system bootup.