Siemens 1190 User Manual

• When authorized, it allows you to call external num-

bers

1

 on a public network.

• The HiPath 1100 can also be programmed to require 

pressing the "Internal" key before an internal number 

can be dialed. When this is the case, there is no 

need to enter an external line access code to dial an 

external number ("Automatic Seizure of an Exter-

2

Check with the Support Technician for your 

system.

• Ask your Support Technician for the required internal 

numbers, public network access codes as well as 

information about enabled features and available ex-

tensions.

• Depending on how the HiPath 1100 is programmed 

(ask the system’s technical support team) it will au-

tomatically select the most economical route for 

making an external call (LCR - Least Cost Routing). 

When an LCR is not available, the non-default carrier 

name  or "EXPENSIVE CONN"  appears on the dis-

play, and a warning tone is emitted.

  Lift the handset.

  • For  an  internal call: Enter an extension number 

(e.g., 11/101).

• For  an  external calls: enter the code for accessing 

an external line (e.g., 0) and the external number you 

want to call.

Wait for the call to be answered. Initiate conversation.

[1] See the chapter Important Programming Data - Classes of Service 

in the Programming Manual.

[2] It allows the user to dial an external call directly, without having to 

dial an external access code (e.g., 0). If a continuous dialing tone is 
heard when the handset is lifted, it means that Automatic Seizure 
Mode is active (see Programming na External Line - Automatic Sei-
zure of an External Line, in the Programming Manual).

oi.book  Seite 18  Mittwoch, 16. August 2006  8:41 08