Siemens 1190 User Manual

During feature configuration the system uses the following signaling tones:

Internal dialing tone

The system is ready to receive and send call information.

Signaling tone

Connection established. Ring signal is being applied to 

phone number.

Dial tone

Network accepted information request and is sending a re-

quest for more information.

Busy signal

It indicates to the caller that the number is busy.

It is also used when the destination cannot be accessed 

(e.g., invalid number).

External false signal

The dial tone that is heard is not from the carrier

Call Waiting Signaling Tone

It indicates to the user having a conversation that there is 

another call ringing.

Call Waiting tone for Door 

Opener

It indicates to the user having a conversation that someone 

is requesting the Door Opener to open the door.

Confirmation tone

The procedure was successfully completed and accepted.

Rejection tone

The procedure is invalid and was not accepted.

Override tone

It alerts the user having a conversation that the call’s priva-

cy was violated (override).

Conference tone

It indicates that a new participant joined the conversation.

Recall confirmation tone

It confirms a callback.

Alert signal

It alerts the called party when the Speakerphone Auto-An-

swering and Paging features are enabled.

Special Dial Tone

Indicates that a service is activated (Night Service, Elec-

tronic Lock, Do Not Disturb, etc.)

Auto-Answering Tone

After a Direct Communication Call is established.

oi.book  Seite 17  Mittwoch, 16. August 2006  8:41 08