GE 1018959 User Manual

 
The SNMP/Web adapter connects to the network using the following parameters: 
• 

IP address 

identifies the adapter on the network. 

• 

Subnet mask 

defines a range of addresses within the organisation. 

• 

Gateway   

the node used for connection to addresses outside the subnet. 

The adapter can be configured to obtain these settings automatically using DHCP or BOOTP protocols, 
or to use static addresses (manual configuration). 
 
 
 

The SNMP/Web adapter comes with a pre-configured MAC address, with the following format: 
00:12:93:Fx:xx:xx 

00:12:93 identifies the manufacturer. 

 

x:xx:xx  is a unique code for every adapter. 

The MAC address is written on a label sticker on the SNMP/Web adapter.  
 
The factory default configuration for the SNMP/Web adapter is using DHCP. Assign the IP address to the 
adapter MAC address in your DHCP server. Then reboot the adapter in order to have it retrieve the IP 
address. The adapter is now accessible and configurable over the network. 
 
 
 
 
 

Every time the network settings are changed, these become effective only after a reboot. The adapter 
can be rebooted: 
• 

Manually, pressing the reset button on the front of the adapter 

• 

Using the console interface (either serial connection or telnet) by injecting the reboot command 

• 

Using a web browser, selecting ‘Reboot’ in the menu 

 
 
 
 
 
 

For more information, and in order to make full use of all advanced functionalities provided by the 
SNMP/Web adapter, refer to the Operating Manual available on the CD-ROM 
 

Modifications reserved 

Page 21/24 

ISG_CNT_SNM_BAS_CRD_1GB_V012.doc 

Installation Guide SNMP/Web Adapter