IBM pc-card das16 User Manual
PC-CARD-DAS16/16AO User's Guide
Installing the PC-CARD-DAS16/16AO
2.
3.
o
o
Select the
Hardware
tab and click on the
Device Manager
button.
Verify that "PCMCIA adapters" is listed in the Device Manager. If you don’t find this entry, or if the
properties for the adapter indicate "this device is not working," you need to install or update your PCMCIA
adapter drivers.
properties for the adapter indicate "this device is not working," you need to install or update your PCMCIA
adapter drivers.
If the PCMCIA adapter is not listed, use the
Add New Hardware Wizard
to install PCMCIA support.
If the PCMCIA adapter is listed but not working, use the
Update Driver
option to install the
appropriate drivers.
After performing the update procedure, reboot your PC and insert your card again.
Connecting the board for I/O operations
Connectors, cables – I/O connector
The table below lists the board connector, applicable cables, and compatible accessory products.
Board connector, cables, and accessory equipment
Connector type
50-pin connector
CPCC-50F-39: 50-pin Micro connector to 50-pin female IDC, one-meter cable (39 inches).
Compatible cables
CPCC-50M-4: 50-pin Micro connector to 50-pin male IDC, 4 inch adapter cable.
and
C50FF-x: 50-pin IDC female to female cable. x = length in feet.
Compatible accessory
products
products
CIO-MINI50
SCB-50
SCB-50
Pin out – I/O connector
Figure 3. 50-pin I/O mini-connector
shows a PC-CARD-DAS16/16AO case looking into the male mini-connector. The connector is
mechanically keyed to insure that the cable is inserted correctly.
12