GE 28320 User Manual

Installation

Base Set-Up

The base needs a direct access connection to the

internet, and the IP address of the base must be

provided by a DHCP server.

CAUTION: To reduce risk

of personal injury, fire, or

damage use only the

-22 power adaptor

listed in the user’s guide.

This power adaptor is

intended to be correctly

orientated in a vertical or

floor mount position.

IMPORTANT: Do not

connect the telephone

line until the handset is

fully charged. The base

must be plugged into the

AC power at all times.

INSTALLATION NOTE:

Your InfoLink is designed

for home use and will

work with most any

standard Internet system

(non-commercial, non-

corporate environments/

applications). This includes

wired and/or wireless

routers which provide

additional “hard” Firewall

security functionality (HTTP

Internet traffic transmits

inbound and outbound via

Port 80, which is typically

open on most firewall set

ups). However, this unit

may not function properly

behind a firewall that

does not allow http traffic

inbound and outbound on

Port 80.

The unit will not work

with a dial-up internet

connection.

ETHERNET Connection

1. Using the ETHERNET cable (RJ45 ) provided with

your phone, connect the cable to your broadband

modem or router with cable access.

2. Connect the other end of the cable to the base

ETHERNET port.

Telephone Cable Connection

To use the phone as standard telephone:
1. Plug one end of the telephone line cord into the

PHONE jack on the back of the base and the other

end into a modular jack.