GE 28320 User Manual

1.  Connect the power adaptor provided with your unit 

to the base. 

2.  Connect the adaptor to an electrical wall outlet. 
3.  When power is applied to the base, the unit goes 

through a one minute initialization process in the 

following sequence:

  a) the blue DECT indicator is on (solid); 

  b) the green POWER indicator flashes;

  c) both the blue DECT and green POWER  

indicators flash; and

  d) the green POWER and blue ETHERNET  

indicators are on (solid).

The unit has now completed the process. The phone 

will not function until this process is complete.

1.  After base is powered up, wait 5-7 seconds until

 

  RSS synchronization icon briefly appears on the 

handset display. This indicates that the handset and 

base are synchronized to each other. 

2.  Next you will see the 

RSS Service Wizard which  

will guide you step by step through setup of 

Weather and Weather Alerts. There are some useful 

channels pre-configured to help get you started.

         -OR- 
  you can bypass the Wizard at this time and return 

later. 

3.  Programmed content windows will start auto 

scrolling and handset is ready for use.

For more information on the RSS setup refer to: 

Programming Your Phone > RSS Settings

NOTE: Your handset will 

automatically display the 

RSS synchronization icon 

for a few seconds when 

the feeds are updated at 

approximately 15 minute 

intervals. During this 

automatic process you will 

not be able to search or 

view your RSS feeds.

*Thomson Inc. does 

not warrant that the 

content of any website 

or RSS feed transmitting 

content to this product 

(InfoLink Phone) will be 

uninterrupted or error 

free. Access to streaming 

content through this 

device is subject to 

provider availability. 

Thomson Inc. does not 

endorse any Internet-

based content or RSS 

feeds maintained by a 

third party that may be 

accessed using this device.