Nokia 3600, 3620 Service Manual
CCS Technical Documentation
3 - Service Software
Company Confidential
NHM-10
Issue 2 01/2004
Copyright 2004 Nokia Corporation
Page 3-15
Company Confidential
Formatting user area
User area also neededs to be formatted in order to make sure that there is no user data
left in the phone.
left in the phone.
Choose
File -> Scan product. In the bottom of the Phoenix window you should see
V3.1, Date, NHM-10(c) NMP
Format User area the following way:
Click
Product -> User area format. You will get a note warning you about loss of user
data. Click
yes on that.
Phoenix shows Formatting user data area, Please wait screen for a while and gives you a
success note.
success note.
Restore settings
Settings can be restored from MMC or Phoenix.
Energy Management Calibration
Connections
NHM-10 phone must be connected to JBV-1 (Docking station) with MJF-31 (Docking
station adapter).
station adapter).
•
Connect CA-5S (DC-DC cable) from JBV-1 into to phone charger connec-
tor before powering up JBV-1.
tor before powering up JBV-1.
•
Power up JBV-1 from external power supply: 11-16 V DC. (Do not take
power from FPS-8 in calibration mode).
power from FPS-8 in calibration mode).
Phoenix Setup
•
Start Phoenix.
•
Select FBUS connection.
•
Choose Main -> Choose product…
•
Choose Maintenance -> Tuning -> Energy Management Calibration com-
ponent.
Calibration
1) Mark all channels (ADC, Battery Size…except Battery temperature).