Nokia 3600, 3620 Service Manual
NHM-10
Company Confidential
3 - Service Software
CCS Technical Documentation
Page 3-14
Copyright 2004 Nokia Corporation
Issue 2 01/2004
Company Confidential
Figure 3: All settings screen
Updating software
New SW package can be updated.
•
Choose
Flashing -> FPS-8 Flash -> Mark both log flashing and Manual
Selection. Then Click on Flash.
•
Now in Flash file selection window, choose the product code.
Select the correct file:
Now click on
OK, and SW update starts.
You will see as the 18 MB package goes into FPS-8 (If transfer is very slow, it is recom-
mended that Parallel port is in ECP mode. Transfer in ECP mode is much faster).
mended that Parallel port is in ECP mode. Transfer in ECP mode is much faster).
If you do not know how to Change PC Parallel port mode from BIOS, contact your local
support.
support.
Then Phoenix erases flash memories .
And finally you will see how SW package goes into phone (When SW update takes place,
Yellow Mode 1 led is blinking fast)
Yellow Mode 1 led is blinking fast)
When SW update has ended yellow led stops blinking and you get a note in windows SW.
You will get instructions to turn the phone on. Do so and wait 15 seconds..
You will get instructions to turn the phone on. Do so and wait 15 seconds..