Canon mf3220, mf3228, mf3240 Service Manual

3-30

F-3-188

1) Place the main unit down on its front face (so that the interior of the main

unit is easily visible).

2) Remove the connector [1] on the ECNT board and take out the cable from

the cable guide.

3) Remove the cassette pickup solenoid [2] (behind the main motor).

- 1 screw [3]

F-3-189

1) Remove the cassette by holding the cassette handle.

1) Lift the rear of the cassette, and separate the rear from the front.

1) Remove the shafts [1] on both sides of the lifting plate.  Remove the lifting

plate [3] while watching the lifting plate spring [2] carefully.

F-3-190

2) Remove the 2 claws [1] on both sides of the cassette separation pad and

lift it up while watching the lifting plate spring [2] carefully.  Ensure that

the separation pad spring does not get lost.

3) Remove both the plate and the cassette separation pad [3] by sliding them

to the left.

F-3-191

4) Remove the cassette separation pad [1] by sliding it upward.

- 2 claws [2]

F-3-192

1) Remove the cassette by holding the cassette handle.

1) Open the front cover [1] and remove the arm claws [2] to disengage the

connection.

2) Remove the shafts on both sides [3] while warping the shaft arms inside,

and remove the front cover.

F-3-193

1) Remove the 2 screws [1] on the right cover.

F-3-194

2) Remove the right cover [1].

- 2 screws [2]

[1]

[2]

[1]

[2]

[3]

[2]

[3]

[1]

[1]

[3]

[2]

[1]

[2]

[1]

[3]

[3]

[2]

[1]