Canon mf3220, mf3228, mf3240 Service Manual
Chapter 3
3-28
- 2 screws [2]
F-3-175
3.5.2.4 Removing the left cover
0012-1659
1) Remove the 2 screws [1] on the left cover.
F-3-176
2) Remove the left cover [1].
- 2 screws [2]
F-3-177
3.5.2.5 Removing the rear cover
0012-1661
1) Opening the face-up cover [1], and then lower the fixing pressure release
levers [2] on both sides and release the pressure.
2) Remove the rear cover [3] by sliding it to the rear.
- 4 screws [4]
F-3-178
3.5.2.6 Removing the Scanner Unit
0012-1662
1) Remove the connector [1] and the flat cable [2] on the ECNT board, and
remove the screw [3]. (Remove the flat cable from the core.)
2) Remove the 2 screws [4] and the 2 pins [5] on the right and left sides.
F-3-179
3) Remove the scanner unit [1] by sliding it to the rear and lifting it up.
- 2 screws [2]
F-3-180
3.5.2.7 Removing the top cover
0012-1663
1) Free the 2 claws [1], and remove the top cover [2].
- 2 screws [3]
F-3-181
[2]
[1]
[1]
[2]
[1]
[1]
[4]
[3]
[2]
[4]
[2]
[5]
[4]
[1]
[3]
[1]
[2]
[2]
[3]
[1]
[1]