Samsung SL-M4080FX User Manual

-

Scan: You can set scan related settings. This feature is also available 
from the machine (see "Understanding the Scan to Email screen" on 
page 126).

-

Email Notification: When an error occurs or the consumables are 
running out, the machine sends a notification to the administrator via 
email. You can set whether to use this feature or not. You can also select 
which alerts to receive and when.

•

Network Settings: You can set up the network environment to use your 
machine as a network machine. You can also set the settings from the 
machine. Refer to the network setup chapter (see "Network Settings" on 
page 239).

-

General: You can set general machine information to use in the 
network and set ethernet settings. This feature is also available from the 
machine.

-

TCP/IPv4, TCP/IPv6, Raw TCP/IP, LPR/LPD, IPP, Telnet, WSD, SLP, UPNP, 
mDNS, CIFS (Shared Folder), SNMPv1/v2, SNMPv3, FTP Print Server, 
AirPrint, ThinPrint®, Google Cloud Print: You can set protocol settings.

-

Outgoing Mail Server (SMTP): You can set server settings for outgoing 
emails. If this setting is not configured, you cannot use scan to email 
feature. Outgoing emails will be sent through SMTP server you set here. 

-

HTTP: You can allow or block users from accessing the SyncThru™ Web 
Service. 

-

Proxy: You can set proxy settings and enable authentication.

8 

The security tab has System Security, Network Security, User Access Control 

and System Log. You cannot access this tab if you do not log-in as an 

•

System Security: From the SyncThru™ Web Service, select the Security tab 
> System Security.

-

System Administrator: Enter the system administrator’s information. 
The machine sends email notification to the email address set here. This 
feature is also available from the machine.

-

Feature Management: You can enable/disable network features. 

Check the features you want to enable and click Apply. 

-

Information Hiding: You can enable/disable network features. Check 

the features you want to enable and click Apply. 

-

Restart Device: You can reboot your machine. Click the Restart Now 
button to reboot.

•

Network Security: From the SyncThru™ Web Service, select the Security 
tab > Network Security.

-

Digital Certificate: You can manage digital certificates. A digital 
certificate is an electronic certificate that verifies the secure association 
between communication nodes. You need to add the certificate for SSL 
communication.