Intel SC5250-E User Manual

• 

Hardware Monitor Subsystem: 
-  Voltage sense to detect out of range power supply voltages  
-  Thermal sense to detect out of range thermal values  
Four fan sense inputs used to monitor fan activity 

 

See the Intel

 Server Board S875WP1-E TPS on the support.intel.com website for more detail. 

The Intel Server Board SE7210TP1-E provides the following feature set:  

o  Support for an Intel

®

 Celeron processor or an Intel

®

 Pentium

®

 4 processor with hyper-

threading technology in a 

µPGA478 socket.  

o  400/533/800 MHz Front Side Bus (FSB) 
o  Intel

®

 E7210 chipset 

•  Intel

®

 827210 Memory Controller Hub (MCH) 

•  Intel

®

 6300ESB I/O Controller Hub (ICH5-R) 

•  Intel

®

 82802AC 8 Megabit Firmware Hub (FWH) 

o  Support for single-sided or double-sided dual inline memory module (DIMM) double-data 

rate (DDR) memory providing up to 4 GB of system memory with four 184-pin DIMM 
sockets. 
•  PC3200 (400 MHz): to run 400 MHz memory at full speed requires an Intel Pentium 4 

processor with 800 MHz system bus frequency. 

•  PC2700 (333 MHz): to run 333 MHz memory at full speed requires an Intel Pentium 4 

processor with 533 MHz system bus frequency.  
Note: PC2700 (333 MHZ) memory will run at 320 MHz frequency when using an Intel 
Pentium 4 processor with 800 MHz system bus frequency. 

•  PC2100 (266 MHZ): PC2100 (266 MHZ) memory may only be used with an Intel 

Pentium 4 processor with 400 MHz or 533 MHz system bus frequency only. 

o  Intel 82547GI Platform LAN Connect (PLC) device for 10/100/1000 Mbits/sec Ethernet LAN 

connectivity 

o  Intel 82551QM device for 10/100 Mbits/sec Ethernet LAN connectivity