Intel SC5250-E User Manual
Intel® Entry Server Chassis SC5250-E
Compatible Intel® Server Boards
Revision 1.02
Intel order number C32881-001
47
9.6 Intel® Entry Server Board S875WP1-E Feature Set
The server board S875WP1-E server board provides an embedded ATA-100* “Valu-Raid”
interface and supports the following feature set:
interface and supports the following feature set:
•
Support for an Intel
®
Pentium
®
4 processor with hyper-threading technology in a
µPGA478 socket with 512KB L2 cache.
(Does not support Pentium 4 processors with 400KB L2 cache)
(Does not support Pentium 4 processors with 400KB L2 cache)
•
400/533/800 MHz System Bus
•
Intel
®
875P chipset
- Intel
®
82875P Memory Controller Hub (MCH)
- Intel
®
82801EB I/O Controller Hub (ICH5-R)
- Intel
®
82802AC 8 Megabit Firmware Hub (FWH)
•
Support for single-sided or double-sided DIMMs (DDR 266, DDR 333 and DDR 400)
providing up to 4 GB system memory with two 184-pin DDR SDRAM Dual Inline Memory
Module (DIMM) sockets.
- DDR400: to run DDR400 memory at full speed requires an Intel Pentium 4 processor
providing up to 4 GB system memory with two 184-pin DDR SDRAM Dual Inline Memory
Module (DIMM) sockets.
- DDR400: to run DDR400 memory at full speed requires an Intel Pentium 4 processor
with 800 MHz front side bus (FSB) frequency.
- DDR333: to run DDR333 memory at full speed requires an Intel Pentium 4
processor with 533 MHz FSB frequency. DDR333 memory will run at 320 MHz
frequency when using an Intel Pentium 4 processor with 800 MHz FSB frequency.
frequency when using an Intel Pentium 4 processor with 800 MHz FSB frequency.
- DDR266: DDR266 memory may only be used with an Intel Pentium 4 processor with
400 MHz or 533 MHz FSB frequency only.
•
One AGP bus with AGP connector:
- One AGP connector supporting 1.5 V 8X AGP cards
- One AGP connector supporting 1.5 V 8X AGP cards
•
One independent PCI bus (32-bit, 33 MHz, 5 V) with three PCI connectors and three
embedded devices:
- 2D/3D graphics controller: ATI Rage* XL Video Controller with 8 MB of SDRAM
- Accelerated Graphics Port (AGP) connector providing AGP 8x support
- Optional SATA controller (on S875WP1LX): Promise Technology* PDC20319
embedded devices:
- 2D/3D graphics controller: ATI Rage* XL Video Controller with 8 MB of SDRAM
- Accelerated Graphics Port (AGP) connector providing AGP 8x support
- Optional SATA controller (on S875WP1LX): Promise Technology* PDC20319
•
LPC (Low Pin Count) bus segment with one embedded device:
- SMSC LPC47M102 LPC Bus I/O controller controller chip providing all PC-
- SMSC LPC47M102 LPC Bus I/O controller controller chip providing all PC-
compatible I/O (floppy, serial, keyboard, mouse)
•
X-Bus segment with one embedded device:
- Flash ROM device for system BIOS: Intel 32 megabit 28F320C3 Flash ROM
- Flash ROM device for system BIOS: Intel 32 megabit 28F320C3 Flash ROM
•
Four external USB ports on the back panel with an additional internal header, which
provides support for an optional two USB ports for front panel support (total possible six
USB ports)
provides support for an optional two USB ports for front panel support (total possible six
USB ports)
•
One serial port and one serial port header.
•
One parallel port.
•
Two IDE interfaces with UDMA 33, ATA-66/100 support
•
Support for up to four system fans and one processor fan
•
Server System Infrastructure (SSI)-compliant connectors for SSI interface support: front
panel, power connector
panel, power connector