LG LDE5415ST Owner's Manual

INSTALLATION

 

•

Move the range close enough to the opening to 

plug into the receptacle.

 

•

Slide the range into position ensuring that the back 

leg slides under the anti-tip bracket. The range 

should sit flush against the back wall when properly 

installed.

 

•

Carefully attempt to tip the range forward to ensure 

that the anti-tip bracket is engaged properly. If 

properly installed, the anti-tip bracket will prevent 

the range from being tipped. If the range can be 

tipped, reinstall the range until the anti-tip bracket is 

properly installed and the range will not tip forward.

 

•

Turn on electrical power. Check the range for 

proper operation.

Check if the range is properly installed and run a test 

cycle.

Touch 

Clear/Off to start test.

Turn each knob to the 

Hi position to check 

that the surface heating elements are working 

properly. The elements should glow red and 

radiate heat, and they should cycle on and off 

periodically even when the knob is in the 

Hi 

position. This cycling prevents the glass-ceramic 

from being cracked by thermal shock.  

IMPORTANT : The warming zone does not 

consume enough power to glow red.

After checking all the surface heating elements, 

check the locking system by touching

Clear/Off for three seconds. The oven door 

should lock and the cooktop should not operate 

while the Lockout function is turned on. Touch 

Lower Clear/Off for three seconds to disable 

Lockout.

Now check the oven's operation. Touch 

Bake 

and touch the number keys to set the oven 

temperature to 350 °F.

The oven should finish preheating in 15 minutes, 

and the convection fan should operate while the 

oven is preheating.

After checking the oven's operation, turn the 

temperature up to 450 °F and leave the oven on 

for at least an hour to help remove any oil which 

might cause smoke and odors when first using 

the oven. 

Smoke may come out of the range when it is first 

used.