LG LDE5415ST Owner's Manual

Page of 108
14 INSTALLATION
Installing the Anti-tip Device
Anti-tip 
bracket
Leveling 
leg
WARNING
Tip - Over Hazard
A child or adult can tip the range and 
be killed. Verify the anti-tip bracket 
has been installed. Ensure the anti-tip 
bracket is engaged when the range 
is moved. Do not operate the range 
without the anti-tip bracket in place. 
Failure to follow these instructions 
can result in death or serious burns to 
children and adults.
To check that leveling leg is 
inserted into anti-tip bracket, 
grasp the top rear edge 
of the range and carefully 
attempt to tilt it forward.
Wall plate
Anti-tip 
bracket
Screw must 
enter wood or 
concrete
Locate the anti-tip bracket using the template
An anti-tip bracket is packaged with the template. 
The instructions include necessary information to 
complete the installation. Read and follow the range 
installation instruction sheet (template).
Leveling the Range
Level the range by adjusting the leveling legs with a 
wrench. Extending the legs slightly may also make it 
easier to insert the rear leg into the anti-tip bracket.
Use a level to check your adjustments. Place the level 
diagonally on the oven rack, and check each direction 
for level.
First check direction  . 
Then check direction  . If the level doesn’t show level 
on the rack, adjust the leveling legs with a wrench.
1
2
Electrical Connection 
Requirements
The range must be installed in accordance with Local 
and Canadian Electrical Codes (latest edition). See 
rating plate for total connected Amp rating. This model 
was shipped direct from the factory with Service cord 
attached. There are no range connections necessary.
NOTE
Only a range cord rated at 40 amps with 120/240 
minimum volt range is required. If a 50 amp range 
cord is used, it should be marked for use with 1
3
/
8
"
 
diameter connection openings.