Liebherr EWTNes 2956 User Manual

WF1051 / EWTNes 2956

10

R

EVERSING

 D

OOR

 H

INGES

6.   Figure 5: Unscrew the lower hinge (13).
 

-  Remove the washer, stops and bushing (14, 7, 8).

 - 

Remove 

screw 

(Q).

 

-  Transfer hinge pin (2) to the opposite side.

 - 

Transfer 

screw 

(Q) to the opposite side.

 

-  Turn the stop (7) through 180° and position 

bushing (8) and washer as shown in the 
detailed drawing. The flat side of the stop must 
face forwards.

 

-  Screw on hinge (13) on the new hinge side.

7.  Install the door fittings as shown in Figure 5. 

Insert the plugs (X) as shown in the detailed 
drawing. Move plug (W) to the opposite side of 
the lower door.

8.  Unscrew the center hinge (10) and cover (11), 

pull them off to the side and after turning them 
through 180°, slide them on again on the 
opposite side and secure them.

9.  Place the lower door on the hinge pin (2) at the 

bottom.

  -  Swivel in the door.
  -  Pay special attention to the bushing (12) in the 

center hinge (10).

  -  Insert the hinge pin (9).