Schneider Electric 17S Series User Manual
7
Hazards, Warnings and Guidelines, continued
WARNING!
THERMAL HAZARD
During operation, the front panel of the drive, which is used as a heat sink, can
become hot and may reach temperatures above 80°C. Check (measure) the heat
sink temperature and wait until it has cooled below 40°C before touching it.
become hot and may reach temperatures above 80°C. Check (measure) the heat
sink temperature and wait until it has cooled below 40°C before touching it.
Failure to observe this precaution can result in severe injury.
WARNING!
OVERCURRENT, OVERLOAD AND OVERHEATING PROTECTION
Separate motor overcurrent, overload and overheating protection is required to be
provided in accordance with the Canadian Electrical Code, Part 1 and the National
Electrical Code.
provided in accordance with the Canadian Electrical Code, Part 1 and the National
Electrical Code.
Failure to observe this precaution can result in severe injury.
Continued on next page