Whirlpool SC 8630 User Manuals

Table of Contents

• front cover

  1
• before you start

  2
• tools needed for installation

  3
• gas supply requirements

  3
• electrical requirements

  3
• now start

  3
  • 1 - remove foam shipping blocks and tape from range

    3
  • 2 - remove regulator, hardware, grates & caps from box

    3
  • 3 - insert cooktop into countertop cutout

    3
  • 4 - remove cooktop from cutout and place it upside down

    3
  • 5 - insert cooktop into cutout

    4
  • 6 - secure cooktop to countertop with clamps

    4
  • 7 - install the pressure regulator

    4
  • 8 - attach flexible connector from gas pipe to regulator

    4
  • 9 - seal all connections with pipe-joint compound

    4
  • 10 - open the shutoff valve in gas supply line

    4
  • 11 - use brush and liquid soap to check for leaks

    4
  • 12 - plug power supply cord into grounded outlet

    4
  • 13 - place trim rings over each burner

    4
  • 14 - check the operation of the cooktop burners

    4
  • 15 - after burner lights, turn control knobs to HI

    4
  • 16 - turn each control knob to LO

    4
• if cooktop does not operate

  5
• if you need assistance

  5
• if you need service

  5
• care, cleaning and maintenance

  5