Tripp Lite MT-SE-37/02 User Manuals

Table of Contents

• Introduction

  1
• Example Network With SNMP Solo

  2
• Figure 1 SNMP Solo Monitoring a UPS on EtherNet

  2
• SNMP Solo Package

  3
• The SNMP Solo Unit

  3
• Figure 2 SNMP Solo Network Connection Panel

  3
• Status LEDs

  4
• DIP Switches

  4
• Figure 3 SNMP Solo Serial Port Panel

  4
• Serial Port

  5
• Two 3.5” Diskettes

  5
• Configuration Cable

  5
• Power Supply

  5
• UPS Interface Cable

  6
• System Requirements

  7
• Initial Installation

  9
• Verify The SNMP Solo Operation

  10
• Figure 4 Communication Screen (Windows)

  10
• Configuration

  11
• Figure 5 Main Menu

  11
• And MIB System Group

  12
• Figure 6 IP Address for the SNMP Solo and More

  12
• Figure 7 Access Controls

  15
• Set Trap Receivers

  16
• Figure 8 Trap Receivers

  17
• Display Settings

  18
• Figure 9 Additional Setup Screen

  18
• Figure 10 Display All Current Settings

  19
• To Save and Exit

  20
• Figure 11 Reset Values To Default

  20
• Figure 12 Save and Exit Messages For Configuration

  20
• Figure 13 Telnet Options

  21
• Upload Firmware

  22
• Final Installation

  23
• Establish Network Communications

  24
• Configuring the NMS

  25
• Compile the Device MIB

  25
• Poll the Device OIDs

  26
• Set the Device OIDs

  26
• Ping the SNMP Solo

  26
• Compile the Device MIB

  26
• Poll the Device OIDs

  27
• Set the Device OIDs

  27
• Ping the SNMP Solo

  27
• SunConnect SunNet Manager

  28
• Compile the Device MIB

  28
• Poll the Device OIDs

  29
• Set the device OIDs

  29
• Ping the SNMP Solo

  29
• Appendix

  30
• Reference

  30
• Communities

  30
• IP Addresses

  30
• Subnetting and Subnet Masks

  31
• Gateways

  32
• Glossary

  33
• Troubleshooting

  35
• Placing a Technical Support Call

  36
• Reference Worksheet

  38