Teledesign Systems Inc TS4000EH User Manuals

User Manual (English)Internal Photos (English)External Photos (Français)

User Manual

Table of Contents

Copyright
2
Disclaimer
2
Emissions
3
- FCC
  3
  - Part 15
    3
  - Part 90
    3
  - Industry Canada
    3
    - ICES-003
      3
    - RSS-119
      3
- Notice
  3
- Safety Warning
  3
- RF Exposure
  3
Table of Contents
4
TS4000 Overview
7
- Introduction
  7
- Features
  7
- Connections
  9
  - Serial Port
    9
    - Signal Levels
      9
    - Standard Case
      9
  - Antenna Connector
    9
  - Power Connection
    9
    - Switching Regulator
      9
    - Power Supply Current
      9
      - Example
        9
        Standard Case
        9
        Fuses
        10
- Mounting
  10
- Configuring the TS4000
  10
- AirTest - Data Testing
  10
- Upgrading the TS4000 Firmware
  10
- AirScan
  10
- Remote Diagnostics
  10
- AirCalc - Range Estimation
  11
- Status Lights
  12
Configuration Program
13
- Using Help
  13
- System Requirements
  13
- Installation
  13
- TS4000 to PC Connection
  13
  - Software Connection
    13
- Programming and Retrieving Configurations
  14
- Storing Configurations
  14
- Diagnostics
  15
  - Diagnostics Screen
    15
  - Modem Hardware Screen
    16
  - Radio Hardware Screen
    16
Serial Port
17
- RS-232 Serial Port Basics
  17
  - Connectors
    17
  - DCE vs. DTE
    17
  - Asynchronous Data
    17
  - Flow Control
    17
    - Hardware Flow Control
      17
    - Software Flow Control
      18
- Serial Port Connector
  18
- Signal Levels
  18
  - Serial Port 1
    18
  - Serial Port 2
    18
  - RS-485
    18
- Signal Options
  18
  - RI Pin Signal Options
    19
    - RI for Modem Power
      19
    - RI Connected for DSR
      19
  - DSR Pin Signal Options
    19
    - DSR Always High
      19
  - DTR Pin Signal Options
    19
    - DTR for Modem Power
      19
- Configuration Options – Serial Port 1
  20
  - Baud Rate List
    20
  - Data Bits
    20
  - Parity
    20
  - Transmit Data Protocol
    20
  - RTS Control of Sleep Mode
    21
  - Wait For Complete Burst Before Beginning Transmission
    21
  - Receive Data Protocol
    22
  - DCD Line Control
    22
  - CTS Line Control
    23
  - DSR Line Control
    23
- Serial Port 2
  24
Radio Setup
27
- Configuration Options
  27
  - Modulation
    27
  - Receive Carrier Detect Level
    28
  - Automatic Station ID
    28
  - Frequency Channel at Power Up
    28
  - Clear Channel Scan
    29
  - Redundancy
    29
    - Sleep
      30
    - Coding (FEC)
      30
    - Data Scramble Code
      30
    - Force Transmit Over Receive
      31
    - Transmit Timeout Timer
      31
    - Transmit Only Operation
      31
    - Receive Only Operation
      31
    - Transmit Power
      31
    - Additional Transmit Attack Time
      31
- Frequency Programming
  32
  - Methods of Programming Channels
    32
  - Frequency Configuration Screen
    33
    - Radio vs. File Settings
      33
- Channel Switching
  34
  - Channel Change with a Control String
    34
- Compatibility
  35
AirNet Packet Protocol
37
- Overview
  37
  - Packet Basics
    37
  - Addressability
    37
  - Acknowledgment and Retries
    37
  - Channel Access
    37
  - Store and Forward Repeater
    37
  - Features
    38
- Configuration Options
  39
  - Packet General
    39
    - Packet Activate
      39
    - Medium (Channel) Access Control (MAC)
      39
    - CSMA MAC Setup
      40
    - Repeater Filtering
      40
    - Addresses
      40
    - Repeater Address List
      40
  - Packet for Port 1 / Packet for Port 2
    42
    - Modem Address
      42
    - Multicast Group Reception
      43
    - Packet Operation
      43
    - Default Transfer
      44
    - Default Destination Address
      44
    - Packet Status Data
      45
    - CSMA MAC Setup
      45
- Control and Status Strings
  46
  - Control Strings
    46
  - Status Strings
    47
- Master-Slave System Setup
  48
  - Setting Packet Timeout
    48
    - Example
      48
  - Data Packet Transmit Time
    49
    - Example
      49
- Polled System with Store and Forward Repeaters
  50
  - Single Repeater System
    51
    - All Units
      51
    - Base Site
      51
    - Repeater Site
      51
  - Dual Repeater System
    53
    - All Units
      53
    - Base Site
      53
    - Repeater A Site
      53
    - Repeater B Site
      53
  - Three Repeater System
    55
    - All Units
      55
    - Base Site
      55
    - Repeater A Site
      55
    - Repeater B Site
      56
    - Repeater C Site
      56
  - Chain Repeater System
    58
    - All Units
      58
    - Base Site
      58
    - Repeater A Site
      58
    - Repeater B Site
      59
    - Repeater C Site
      59
    - Repeater D Site
      59
  - Other System Topologies
    60
- CSMA System Setup
  61
  - Basic System - Setup Summary
    61
    - Slot Time
      61
    - Min Idle Slots
      61
    - Tx Index
      61
    - Packet Timeout
      62
  - System with Repeaters - Setup Summary
    62
    - Slot Time
      62
    - Min Idle Slots
      62
    - Tx Index
      62
    - Packet Timeout
      63
  - Setting Slot Time
    64
  - Setting Min Idle Slots
    64
    - Systems without Repeaters
      64
    - Systems with Repeaters
      64
      - Min Idle Slots
        64
      - Tx Index
        65
  - Setting Tx Index
    65
    - Example
      66
  - Setting Packet Timeout
    67
    - Systems without Repeaters
      67
    - Systems with Repeaters
      67
  - Data Packet Delay
    68
    - Average Delay
      68
    - Example
      69
    - Probable Delay
      69
    - Example
      69
GPS Configuration
70
- Configuration Options
  70
  - Function
    70
  - Baud Rate List
    70
  - Data Bits
    71
  - Parity
    71
  - Radio Operation
    71
  - Frequency Channel at Power Up
    71
  - Transmit Power
    71
  - Automatic Station ID
    72
  - Receive Carrier Detect Level
    72
  - Trimble Compatible
    72
Testing
73
- AirTest
  73
  - Data Test
    73
  - BER Test
    74
- AirScan
  75
  - AirScan Controls
    75
    - Display
      75
    - Center Frequency
      75
    - Frequency Span
      75
Remote Diagnostics
76
- Remote Diagnostics with Repeaters
  76
Upgrading Firmware
79
- Upgrading
  79
Licensing
80
- User’s License
  80
  - USA (FCC)
    80
    - Licensing Service Companies
      80
    - Other Contacts
      81
  - International
    81
- Manufacturer’s Certification
  81
  - USA (FCC)
    81
    - Part 15
      81
    - Part 90
      81
  - Industry Canada
    81
    - ICES-003
      81
    - RSS-119
      81
  - International
    81
Service and Support
82
- Contacting Teledesign
  82
- Returning Equipment
  82
Warranty
83
- Two Year Warranty
  83
- Exclusions
  83
- Limitations
  83
Appendix A - Serial Ports
84
- Standard Case
  84
  - Serial Port 1 Pinout
    84
  - Serial Port 2 Pinout
    84
- Watertight Case
  84
  - Pinout
    84
    - Notes
      85
- Standard RS-232 Serial Port Pinout
  86
- Standard Usage of the RS-232 Control Signals
  86
- Signal Levels
  87
  - RS-232 Signal Levels
    87
  - TTL Signal Levels
    87
  - Signal Polarity
    87
Appendix B – ASCII Character Set
88
Appendix C – Control and Status Strings
89
- General Strings
  89
Appendix D – Internal Jumper Block
95
- Factory Default Jumper Settings
  95

Size:

785 KB
Pages:

97
Language:

English

Internal Photos

Internal Photos

Size:

517 KB
Pages:

4
Language:

English

External Photos

External Photos

Size:

156 KB
Pages:

2
Language:

Français