User ManualTable of Contents1 Product description41.1 Introduction41.2 General specification of the hardware platform41.3 Ethernet Gateway41.4 RAS Modem & PIR51.4.1 Remote Access Server functions51.4.2 Programmable Industrial Router functions51.5 Datalogger51.6 Typical applications51.7 Part Numbers and internal options51.8 External accessories62 Structure of the eWON® technical documentation73 Housing and markings83.1 Housing83.2 Markings93.3 Applicable directives, standards and compliance93.4 Equipment information and versions103.5 Mechanical outline103.6 Mounting and environmental conditions113.7 Preparing the installation123.8 Specifications for external power supply selection123.8.1 Auto fuse124 Front panel control LEDs135 Communication interfaces and I/Os145.1 Ethernet Port145.2 Embedded PSTN Modem145.3 Embedded GSM/GPRS Modem145.3.1 Recommendations for the GSM/GPRS antenna155.4 Serial ports165.4.1 Serial port #1165.4.2 Serial port #2175.4.3 Serial port #3185.5 Digital Inputs195.6 Digital Outputs205.6.1 Open collector Digital Output205.6.2 Relays215.7 Analog Inputs215.7.1 Configurable standard Analog Inputs (AI1 - AI4)215.7.2 Resistive Temperature Detector Inputs226 Communicating with the eWON®236.1 By Ethernet236.2 By phone line or GSM236.2.1 Under Windows 98, NT and 2000236.2.2 Under Windows XP247 IP parameters configuration258 Technical support268.1 Resets268.1.1 User Reset268.1.2 Factory Reset269 Appendix: Pinouts and connections279.1 Power Supply279.2 Ethernet289.2.1 Direct connection289.2.2 Connection over hub/router299.3 RJ45 connector309.4 Input/Outputs319.4.1 DI / DO connector319.4.2 Analog Input329.4.3 Relays output339.4.4 Digital input349.5 Serial Ports359.5.1 Pinout serial ports 1 and 3 (according to mode):369.5.2 Pinout serial port 2369.6 Unitelway/Modbus serial cable379.7 PSTN phone line connector38Size: 2.13 MBPages: 38Language: EnglishOpen manual