Mitsubishi Electronics AJ65SBT-64AD User Manuals

Table of Contents

• SAFETY PRECAUTIONS

  2
• REVISIONS

  5
• INTRODUCTION

  6
• CONTENTS

  6
• About Manuals

  8
• Conformation to the EMC Directive and Low Voltage Instruction

  8
• About the Generic Terms and Abbreviations

  9
• Product components

  10
• 1 OVERVIEW

  12
  • 1.1 Features

    12
• 2 SYSTEM CONFIGURATION

  14
  • 2.1 Overall Configuration

    14
  • 2.2 Applicable System

    15
• 3 SPECIFICATION

  16
  • 3.1 General Specification

    16
  • 3.2 Performance Specification

    17
  • 3.3 I/O Conversion Characteristics

    18
    • 3.3.1 Voltage input characteristics

      19
    • 3.3.2 Current input characteristics

      20
    • 3.3.3 Relationship between the offset/gain setting and digital output value

      21
    • 3.3.4 Accuracy

      21
    • 3.3.5 Conversion speed

      22
  • 3.4 Function List

    23
    • 3.4.1 Sampling processing

      24
    • 3.4.2 Moving average processing

      24
  • 3.5 Remote I/O Signals

    25
    • 3.5.1 Remote I/O signal list

      25
    • 3.5.2 Functions of the remote I/O signals

      26
  • 3.6 Remote Register

    28
    • 3.6.1 Remote register allocation

      28
    • 3.6.2 A/D conversion enable/prohibit specification (Address RWwm)

      29
    • 3.6.3 Input range setting (Address RWwm+1)

      30
    • 3.6.4 Moving average processing count setting (Address RWwm+2)

      31
    • 3.6.5 CH. []Digital output value (Address RWrn to RWrn+3)

      31
• 4 SETUP AND PREPARATION BEFORE OPERATION

  32
  • 4.1 Pre-Operation Procedure

    32
  • 4.2 Precautions When Handling

    32
  • 4.3 Name of Each Part

    34
  • 4.4 Offset/Gain Setting

    36
  • 4.5 Station Number Setting

    38
  • 4.6 Facing Direction of the Module Installation

    38
  • 4.7 Data Link Cable Wiring

    39
    • 4.7.1 Instructions for handling the CC-Link dedicated cables

      39
    • 4.7.2 Connection of the CC-Link dedicated cables

      39
  • 4.8 Wiring

    39
    • 4.8.1 Wiring precautions

      39
    • 4.8.2 Module connection example

      40
  • 4.9 Maintenance and Inspection

    40
• 5 PROGRAMMING

  42
  • 5.1 Programming Procedure

    42
  • 5.2 Program Examples

    43
    • 5.2.1 Program examples for use of the ACPU/QCPU (A mode) (FROM/TO instructions)

      43
    • 5.2.2 Program examples for use of the ACPU/QCPU (A mode) (dedicated instructions)

      48
    • 5.2.3 Program examples for use of the QnACPU

      53
    • 5.2.4 Program examples for use of the QCPU (Q mode)

      56
• 6 TROUBLESHOOTING

  60
  • 6.1 Using the Remote Input Signals to Check Errors

    60
  • 6.2 Using the LED Indications to Check Errors

    61
  • 6.3 When the digital output value cannot be read

    63
  • 6.4 Troubleshooting for the Case where the "ERR." LED of the Master Station Flickers

    64
• APPENDIX

  66
  • Appendix1 Comparison between This Product and Conventional Product

    66
  • Appendix2 External dimension diagram

    68
• INDEX

  70
• WARRANTY

  73