Intel DBPXA210 User Manuals

Table of Contents

• Revision History

  5
• Preface

  6
  • Affected Documents/Related Documents

    6
  • Nomenclature

    7
  • General Information

    8
• Summary of Changes

  9
  • Codes Used in Summary Table

    9
• Intel® BBPXA2xx Development Baseboard

  12
  • 10. UCB1400 Generates Interrupts Incorrectly

    12
  • 11. USB Cable Attach/Detach Detection Interrupt Is Constantly Asserted

    12
  • 12. 100MHz SDRAM Failure

    13
  • 14. LCD Touch Screen Intermittently Fails

    13
  • 15. New Philips UCB1400 Audio Codec on BBPXA2xx Development Baseboard Requires Software Change

    15
  • 16. Conditional ECO To Use 3.3V PCMCIA Cards

    15
  • 17. Conditional ECO To Use The Expansion Port J26

    15
  • 18. Conditional ECO For USB “Soft Connect” Support

    15
• Intel® DCPXA250 Processor Card

  16
  • 3. VCC_PLL And VCC_CORE Pin Voltage Must Be Equal

    16
  • 6. 50MHz SDRAM Requires 0ohm Resistors

    16
  • 7. For ARM* Multi-ICE* JTAG Use

    17
  • 8. Excessive Oscillator Output Voltage to PEXTAL Pin

    18
  • 9. Coin Cell Battery Issue

    19
  • 10. Signal Integrity Problems On SDCLK

    19
  • 13. VCC Core Voltage Change

    20
• Intel®DCPXA210 Processor Card

  21
  • 1. For Multi-ICE JTAG Use

    21
  • 2. MMC MMCLK Support

    21
  • 3. PLL Voltage Too High

    21
  • 4. Remove Coin Cell Battery

    22
  • 5. Incorrect Boot Mode Selected For PXA210 Processor

    22