User ManualTable of ContentsChapter 1 Introduction191.1 Documents about the GR2000-B models19Chapter 2 Setup Process212.1 Check that All Necessary Components are Present212.2 Assemble the Required Tools for Setup.212.3 Setting Up the GR2000-B222.3.1 The GR2000-1B222.3.2 GR2000-2B232.4 Dangers, Cautions, and Notes Regarding Setup252.5 Installing the GR2000-B on a Table or Desk262.6 Attaching and Detaching the Power Cable272.7 Installing a Memory Card282.8 Software302.9 The Setup Terminal and Cable Connections312.9.1 Setup Terminal312.9.2 Connecting Cable312.9.3 Connecting a Setup Terminal to the GR2000-B322.9.4 Connecting the GR2000-B to Other Devices322.9.5 Turning the Power Switch ON332.10 Normal Start-Up Process for the GR2000-B332.10.1 Turning the Power OFF33Chapter 3 Basic Operations353.1 Configuration Examples353.2 Startup of the GR2000-B363.2.1 First-Time Login363.2.2 Setting the Time363.3 Setting the Configuration373.3.1 Enter the Administrator Mode373.3.2 Enter the Configuration Edit Mode (Begin Editing the Configuration)373.3.3 Open the Configuration File383.3.4 Set an IP Address for the Ethernet Port383.3.5 Set a Default Route383.3.6 Check the Configuration You Set by Displaying its Information393.3.7 Save the Configuration Information Into the Configuration File393.3.8 Close the Configuration File393.3.9 Return to the Administrator Mode393.3.10 Exit the Configuration Edit Mode (Finish Editing the Configuration)403.4 Display of Operation Status413.4.1 Display of the Operation Status Covering the Entire Router413.4.2 Display of the Operation Status of the Built-In Ethernet423.4.3 Display of the Operation Status of the Interface Configured423.4.4 Display of the Routing Table423.5 More Details About Operation43Chapter 4 Troubleshooting454.1 Troubleshooting for Operations Introduced in this Guide454.2 More Details About Troubleshooting46Size: 709 KBPages: 48Language: EnglishOpen manual