GE BusSecure User Manual
BusSecure User Manual
BusSecure Configuration
0150-0263A / May 2003
25
4.1.2 C
ONFIGURE
C
AMERAS
Click on the Configure Camera option to display the following screen:
The configuration options on this page include:
•
Name – User supplied camera name or designation.
•
Type – Camera type, Color or Monochrome.
•
Normal Record Rate* – Fast, Normal, or Slow.
•
Normal Quality – High, Medium, or Low.
•
Trigger Record Rate* – Fast, Normal, or Slow.
•
Trigger Quality – High, Medium or Low.
•
AGC Level – Automatic Gain Control (Positive numbers makes the images brighter, Negative
numbers make the images darker, and 0 is the default value). Select from +5 to –5.
numbers make the images darker, and 0 is the default value). Select from +5 to –5.
A Reset Defaults button is also available. Click the Accept button to enter the changes or click the
Reset button to undo any changes.
Reset button to undo any changes.
*Note: The Normal and Trigger record rate programming feature of any camera in the system depends on the capture rate
of the other cameras. Therefore, if you want camera 1 to capture images at a faster rate than other cameras in the system,
you must set camera 1’s capture rate (Normal or Trigger) to fast and the other cameras capture rates to normal or slow.
of the other cameras. Therefore, if you want camera 1 to capture images at a faster rate than other cameras in the system,
you must set camera 1’s capture rate (Normal or Trigger) to fast and the other cameras capture rates to normal or slow.