IBM 09-0572-000 User Manual
2-8
C
HAPTER
2: I
NSTALLING
THE
3C619C A
DAPTER
Connecting to Shielded Twisted-pair (STP) Cable
1 Locate the adapter’s DB-9 connector on the backplate, as
Figure 2-5 Attaching the STP Cable with the DB-9 Connector
2 Locate the DB-9 connector on the shielded twisted-pair
cable.
3 Connect the cable’s DB-9 connector to the adapter’s DB-9
port, and secure it by tightening the two screws.
4 Connect the other end of the cable to a network dual
access unit (DAU), a multistation access unit (MAU), or a
controlled access unit (CAU).
controlled access unit (CAU).
If you have a NetWare server, proceed to Chapter 3. If you
have any other type of network operating system, proceed to
Chapter 4.
have any other type of network operating system, proceed to
Chapter 4.
4 16
DB-9 port
DB-9
connector