Liebherr 120309 7084442 - 00 User Manual

First check whether you can correct the fault yourself by refer-

ence to the list  (see Malfunction). If this is not the case, please

contact the customer service whose address is given in the en-

closed customer service list.

Risk of injury if repair work is not carried out professionally!

u

Have  any  repairs  to  and  intervention  in  the  appliance  and

mains power cable, which are not expressly mentioned in the

(see Maintenance) carried out by the customer service only.

u

Read  the  appliance

designation

 Fig. 14 (1)

,

service No.

 Fig. 14 (2)

and 

serial 

No.

Fig. 14 (3)

 off the type

plate located inside the

appliance  on  the  left-

hand side.

Fig. 14 

u

Notify  the  customer  service,  specifying  the  fault,  appliance

designation

 Fig. 14 (1)

, service No.

 Fig. 14 (2)

 and serial No.

Fig. 14 (3)

.

w

This will help us to provide you with a faster and more accurate

service.

u

Keep the appliance closed until the customer service arrives.

w

The food will stay cool longer.

u

Pull out the mains plug (not by pulling the connecting cable)

or switch off the fuse.

Your appliance is designed and manufactured for a long life span

and reliable operation. If a malfunction nonetheless occurs dur-

ing operation, check whether it is due to a handling error. In this

case you will have to be charged for the costs incurred, even

during the warranty period. You may be able to rectify the follow-

ing faults yourself:
Appliance does not work.

→

The appliance is not switched on.

u

Switch on the appliance.

→

The power plug is not properly inserted in the wall socket.

u

Check power plug.

→

The fuse of the wall socket is not in order.

u

Check fuse.

→

The compressor switches to a low speed when little cold is

needed. Although the running time is increased as a result,

energy is saved.

u

This is normal in energy-saving models.

→

SuperCool is activated.

u

The compressor runs for longer in order to rapidly cool the

food. This is normal.

→

This noise comes from the refrigerant flowing in the refriger-

ation circuit.

u

The sound is normal.

→

The noise is produced whenever the refrigeration unit (motor)

automatically switches on or off.

u

The sound is normal.

→

The  refrigeration  increases  automatically  when  the  Super-

Cool function is activated, fresh food has just been placed in

the appliance or the door has been left open for a while.

u

The sound is normal.

→

The ambient temperature is too high.

u

→

The sound is produced by air flow noise of the fan.

u

The sound is normal.

→

The appliance is not standing firmly on the floor. As a result,

adjoining units or objects are set into vibration by the running

refrigeration unit.

u

Move the appliance away a little and align it using the adjust-

able feet.

u

Move bottles and containers apart.

The temperature display indicates: F0 to F9

→

There is a fault.

u

Contact the customer service  (see Maintenance).

→

The demo mode is activated.

u

Contact the customer service  (see Maintenance).

→

The door of the appliance is not properly closed.

u

Close the door of the appliance.

→

Insufficient ventilation.

u

Clear ventilation grilles.

→

The ambient temperature is too high.

u

→

The appliance was opened too frequently or for too long.

u

Wait until the appliance reaches the required temperature it-

self.  If  not,  contact  the  customer  service.    (see  Mainte-

nance).

→

The temperature is incorrectly set.

u

Set to a colder temperature and check after 24 h.

→

The appliance is too close to a heat source.

u

Solution:  (see Putting into operation).

→

The appliance is not switched on.

u

Switch on the appliance.

→

The door was open longer than 15 min.

u

The interior light automatically switches off if the door has

been open for about 15 min.

→

If the interior light is not on but the temperature display is lit,

the bulb is faulty.*

u

Change the bulb:  (see Maintenance)*

→

The LED interior lighting is faulty or the cover is damaged:*

Risk of injury due to electric shock!

Live parts are located under the cover.

u

Have the LED interior light changed or repaired only by the

customer service or by specialized personnel trained for the

purpose.

Danger of injury due to laser radiation, class 1M.

u

Do not look inside when the cover is open.