Siemens Camera Accessories 6AU1900-1AB32-0BA0 User Manual
Configuring
3.3 Editing a Cam with CamTool
CamTool
Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0
Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0
3-7
3. The Insert Cam window appears. Under Name, enter a unique name for the cam (all the
cams existing in the project are displayed under Existing cams).
Figure 3-3
Window for inserting a cam
4. Click OK. A window appears in the working area of SIMOTION SCOUT. The diagrams of
the cam depending on the settings in the menu Cam > Diagrams are displayed in this
window.
Notice
The following are represented in the cam diagrams:
The following are represented in the cam diagrams:
•
the master axis in the horizontal direction (X-axis) and
•
the slave axis in the vertical direction (Y-axis).
3.3.3
Edit cam created with CamEdit with CamTool
Editing a Cam with CamTool
To edit a cam created with CamEdit with CamTool:
1. Close the cam in SIMOTION CamEdit.
2. Find the cam that you want to edit with SIMOTION CamTool in the project navigator.
3. Right-click the cam and select Convert to CamTool in the displayed context menu. The
1. Close the cam in SIMOTION CamEdit.
2. Find the cam that you want to edit with SIMOTION CamTool in the project navigator.
3. Right-click the cam and select Convert to CamTool in the displayed context menu. The
cam is then opened the next time with SIMOTION CamTool.