Siemens AC75 User Manual
AC75 AT Command Set
13.27 AT^SSDA
s
AC75_ATC_V01.002
Page 400 of 569
10/30/06
Confidential / Released
13.27
AT^SSDA Set SMS Display Availability
This command allows to notify the AC75 of its controlling application's capability to immediately display incoming
SMS on a display.
If the application is able to display incoming short messages, a class 0 message shall be displayed immediately.
However, if it does not, class 0 messages shall be treated as if no message class is determined (GSM 03.38
).
The effect of this command if
=1 is to determine the behavior of parameter
If multiplex mode is enabled (
) and
=1 is set on any logical channel, all other chan-
Syntax
Parameter Description
Display Availability
0
0
(&F)
Application is not able to display incoming short message
1
Application is able to display incoming short message
Note
• If the ME operates on different instances (MUX channels 1, 2, 3 or ASC0/ASC1) avoid different settings for
routing and indicating short messages. For example, if messages shall be routed directly to one instance of
the TE (set with
,
or
on another instance. Any attempt to activate settings that conflict with existing settings on
another interface, will result in CME ERROR, or accordingly CMS ERROR.
Test Command
AT^SSDA=?
Response(s)
^SSDA:
list of supported
OK
Read Command
AT^SSDA?
Response(s)
^SSDA:
OK
Write Command
Response(s)
OK
Reference(s)
PIN
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
SIEMENS
-
+
+
+
+
+
+
-
+
-
<da>
(num)