GE ISOVOLT Titan E Brochure
GE Inspection Technologies
GE Inspection Technologies
We reserve the right to technical modifications without prior notice.
SEIFERT OLK 50
Oil Cooling Aggregate
Xray
Xray
©2004 General Electric Company. All rights reserved.
GEIT-30066GB (5/04)
GEInspectionTechnologies.com
The OLK 50 is an air-cooled refrigeration
aggregate designed to facilitate anode
heat dissipation of the X-ray tube when
operating at high ambient temperatures
(up to 40° C) and can also be used when,
for economical reasons a re-cooling of the
tube-cooling oil from the water supply is
not feasible.
aggregate designed to facilitate anode
heat dissipation of the X-ray tube when
operating at high ambient temperatures
(up to 40° C) and can also be used when,
for economical reasons a re-cooling of the
tube-cooling oil from the water supply is
not feasible.
The design allows the cooling aggregate to
transfer the heat from the X-ray tubes to
the ambient air. Therefore, sufficient fresh
air supply must be guaranteed.
transfer the heat from the X-ray tubes to
the ambient air. Therefore, sufficient fresh
air supply must be guaranteed.
For operation at up to approximately
20°C we recommend the oil cooling
pump OL 4503.
20°C we recommend the oil cooling
pump OL 4503.
If re-cooling from the water supply is
available, the oil cooling pump OW 4002
is recommended.
available, the oil cooling pump OW 4002
is recommended.
The aggregate is mounted in a square
tube frame and is mobile on 4 castors.
tube frame and is mobile on 4 castors.
Equipped with CFC-free coolant.
Technical Data
Dimensions and weight
height
925 mm / 36.4”
width
612 mm / 24.1”
length
590 mm / 23.2”
weight
approx. 180 kg / 396 lbs without oil
capacity
25 liters
Characteristics
cooling power
5000 W at 32°C ambient temperature
oil flow rate
> 22 l/min at 4.0 bar
power connection
3N PE 400/230 V, 50 Hz
max. mains current
8.2 A
noise level
< 70 dB(A) (in a distance of 1 m (3.2 ft))
Environmental conditions
operating temperature
+ 5° C ... + 40° C
storage temperature
- 25° C ... + 70° C (with antifreeze filling)
humidity
20 % ... 80 %
Coolant circuit
cooling agent
R 22 (CFC-free)
Settings
pressure
max. 9.25 bar
flow rate monitor OFF
17 l/min
oil forward line (T1)
20° C
temperature (T2)
40° C
Compressor
type
TAH 4518 A
motor
0.55 kW
rated speed
2900 min-1
Connecting cable
5 x 1.5 mm
2
Grounding plug, length 10 m (32 ft)
5 x 1.5 mm
2
CECON plug, length 10 m (32 ft)
Application