Whirlpool 15080000 User Manual

Page of 20
 
Document ID:15080000 
Rev: E 
Technical Support: 800-626-6912 
       Page 18 of 20 
Removing / Replacing Drain Handle 
Tools needed: 
Phillips head screwdriv er
 
Check y our state and local regulations for cleaning procedures.  Links to y our state boards can be f ound on our web site, at 
www.europeantouch.com.  Ref er to the cleaning procedure page headed “Crystal Clean™ Pipe-Free
®
 Spa - Cleaning and Disinf ecting 
Procedures,” page 17. 
 
 
Follow the steps below for cleaning and replacing parts. 
 
 
 
Step 1: To remove the chrome 
drain handle, loosen the set 
screw in the slot on the 
drain handle and slip off 
chrome handle from chrome 
handle post.   
Step 2:  Picture, with the drain 
handle removed, shown for 
cleaning reference. 
Picture, of drain plunger removed, 
shown for cleaning 
reference. 
Removing / Replacing Impeller 
Check your state and local regulations for cleaning procedures.  Links to your state boards can be found on our web site, 
at www.europeantouch.com.  Refer to the cleaning procedure page headed “Crystal Clean™ Pipe-Free
®
 Spa - Cleaning 
and Disinfecting Procedures,” page 17, for cleaning recommendations.
 
 
Follow the steps below for cleaning and replacing parts. 
 
 
 
Step 1: Remove the tee knobs (2) by 
turning counter clockwise. 
Step 3:  Remove the impeller  knob by 
turning counter clockwise. 
Step 5: Once parts are clean, 
complete steps one through four in 
reverse order to replace the parts. 
 
 
 
Step 2: Lift the footplate to remove. 
Step 4: Lift the impeller. 
Step 6: Press firmly down on footplate 
to help seal while 
simultaneously tightening tee 
knobs.