LG D1453WF Owner's Manual

Page of 36
A qualified electrician/plumber or competent person should carry out any electrical/
• 
plumbing work required to install this appliance.
WARNING
1.  This appliance must be supplied with 
correct rating voltage and hertz as shown on 
instruction manual, and connected to an 
individual, properly earthed branch circuit, 
protected by a minimum 15 amp circuit 
breaker or time delay fuse. 
Wiring must be 2 wires with Earth.
2.   The power plug must be in a accessible 
location adjacent to and not behind the 
dishwasher and within 1.2 meters of the 
dishwasher side.(See page 9 Fig.A)
3.   The power plug must be correctly earthed, if 
in doubt, have it checked by a qualified 
Electrician. No other appliance should be 
connected to the same plug outlet by a 
double adapter or similar plug.
Dangerous voltage
To indicate hazards arising 
from dangerous voltages.
Note- in case of an application 
warning sign, the rules 
according to ISO 3864 should 
be adhered to.
1.  This dishwasher is designed to fit the size 
shown as below.
2.   Select a location as close to sink as possible 
for ease of connection to the water and drain 
pipes.
3.   To ensure good drainage, the dishwasher 
should not be installed more than 3 meters 
away from the sink.
4.  If dishwasher is installed in a corner, a 
minimum of 5cm of space is required 
between the washer and an adjacent cabinet 
or wall.
7
Unit:mm
INSTALLATION INSTRUCTIONS
For personal safety, remove house 
• 
fuse or open circuit breaker before 
installation. 
Do not use an extension cord or 
• 
adapter plug with this appliance. 
 
Electrical and earthing connections must 
comply with the national electrical code/
provincial and municipal code and/or 
other local codes.
CAUTION
Any bare wood surrounding the 
• 
dishwasher should be sealed with a 
waterproof paint or sealant to prevent 
swelling.
CAUTION
 Prepare cupboard opening
  Preparation for electrical wiring