Hitachi US7070447-001 User Manual
HiSpeed Switch Troubleshooting Guide
10-6
US7070447-001, Rev 01
Draft Level—Hitachi Confidential
and performance issues. If using static routes on the HiSpeed switch,
you must configure those routes on those directly connected switches
and routers. On the HiSpeed switch, use the following command:
you must configure those routes on those directly connected switches
and routers. On the HiSpeed switch, use the following command:
/INET/SHOW >static
/INET/CONFIG/ROUTE/add
Problem:
Cannot establish a telnet session to the switch.
Solution:
The HiSpeed switch uses the well known TCP port 23 for Telnet. Verify
that the socket is in a ‘Listen’ state.
that the socket is in a ‘Listen’ state.
/INET/SHOW
>iconnect:
CLI Commands
/INET/CONFIG/ipr
Enables/disables Route Cache Forwarding.
/INET >ping <hostname>
[NumberofPackets]
Performs an ICMP echo request.
/INET >rlogin <hostname>
Used when logging onto a Unix server.
/INET/CONFIG/ROUTE >
•
ADD
•
DEFAULT
•
DELETE
•
RMDEFAULT
Commands available for configuring static and
default routes.
default routes.
/INET/SHOW >
•
ARP
•
ROUTE
•
STATIC
•
ICONNECT
•
RTCACHE
Commands available for displaying Routing
tables, ARP cache, and TCP/IP connections.
tables, ARP cache, and TCP/IP connections.
/INET >stats
•
FORWARD
•
ICMP
•
IP
•
SNMP
•
TCP
•
UDP
Commands available for displaying IP statistics.