Hitachi US7070447-001 User Manual

Hardware Diagnostics

US7070447-001, Rev 01

3-5

The HiSpeed switch is shipped standard from the factory with the following 
system configurations.  

❒

Memory: 
8 Mbytes (DRAM)

❒

Boot Prom: 
512 Kbytes (EPROM)

— Initialization boot code

— Power-On Self-Test (POST)

— TFTP/FTP boot code

— Modem remote control

— Routines to load and execute compressed code

❒

Flash: 4 Mbytes

— compressed system code

— compressed systems diagnostics

— system configuration data

— system traces (for debugging purposes)

The HiSpeed switches are shipped from the factory without any IP configurations 
to the switch. To perform any routing and network management to the switch, you 
must assign an IP address to a VLAN on the switch.  Otherwise, the switch will 
only provide core switching functionality.  The factory default settings on the 
switch are configured as follows:

❒

Console speed is 9600

❒

Login password is switch

❒

All ports belong to VLAN 1

❒

RIP is silent

❒

Ethernet statistics are disabled