HP ZBook 17 Service Manual

Loosen the captive Phillips screw (2) that secures the upgrade bay hard drive carrier to the

computer, and then insert a flat-bladed screwdriver or similar tool into the upgrade bay hard drive

tab access (3) and press the tab to the left to release the upgrade bay hard drive carrier from the

computer (4).

Remove the 2 Phillips PM2.0×5.0 screws (1) that secure the top bracket to the hard drive carrier,

and then remove the bracket from the carrier (2).

Remove the 4 Phillips PM2.5×3.0 screws (1) that secure the hard drive to the carrier, and then

pull the hard drive away from the connector (2) to disengage it.

Chapter 5 Removal and replacement procedures for Customer Self-Repair parts