HP ZBook 17 Service Manual

To move the device down in the boot order, use a pointing device to click the down arrow, or

press the 

-

 key.

To save your changes and exit Computer Setup, click the Save icon in the lower-left corner of the

screen, and then follow the on-screen instructions.

– or –

Use the arrow keys to select File > Save Changes and Exit, and then press 

enter

.

To dynamically choose a boot device for the current startup sequence, follow these steps:

Open the Select Boot Device menu by turning on or restarting the computer, and then pressing 

esc

while the “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen.

Press 

f9

.

Use a pointing device or the arrow keys to select a boot device, then press 

enter

.

To start Computer Setup and set the computer to display the MultiBoot startup location menu each time

the computer is started or restarted, follow these steps:

Turn on or restart the computer, and then press 

esc

 while the “Press the ESC key for Startup Menu”

message is displayed at the bottom of the screen.

Press 

f10

 to enter Computer Setup.

Use a pointing device or the arrow keys to select System Configuration > Boot Options,

and then press 

enter

.

In the MultiBoot Express Popup Delay (Sec) field, enter the length of time in seconds that

you want the computer to display the startup location menu before it defaults to the current

MultiBoot setting. (When 0 is selected, the Express Boot startup location menu is not displayed.)

To save your changes and exit Computer Setup, click the Save icon in the lower-left corner of the

screen, and then follow the on-screen instructions.

– or –

Use the arrow keys to select File > Save Changes and Exit, and then press 

enter

.

Your changes go into effect when the computer restarts.

Using MultiBoot

115