Siemens Network Hardware SM2 monitoring system User Manual
130
U3585-J-Z125-8-76
SET-SERVICETIME-PARAMETER
Statements for SM2 administrators
SET-SERVICETIME-PARAMETER
Define SERVICETIME monitoring parameters
Define SERVICETIME monitoring parameters
Function
This statement is used to define the devices for the SERVICETIME monitoring program.
Format
Operands
DEVICES = list-poss(256): <alphanum-name 2..4 with-wild>
Specifies the mnemonic device names of the devices to be monitored. A check is carried
out to establish whether these devices are defined in the configuration. An asterisk (*) is
also permitted as the last character in a wildcard specification.
Specifies the mnemonic device names of the devices to be monitored. A check is carried
out to establish whether these devices are defined in the configuration. An asterisk (*) is
also permitted as the last character in a wildcard specification.
Note
Up to 256 devices are monitored. If partial qualification means that more than 256
devices are defined, these are selected in the following order of priority:
devices are defined, these are selected in the following order of priority:
–
devices whose mnemonic device names have been specified in their entirety
–
devices whose mnemonic device names have been specified in partially qualified
form
form
–
the sequence in the PDT (Physical Device Table)
SET-SERVICETIME-PARAMETER