Intel IQ80321 User Manual
Board Manual
95
Intel
®
IQ80321 I/O Processor Evaluation Platform
Getting Started and Debugger
B.5
Debugging Out of Flash
JTAG debuggers can be used on two levels; with or without the source code. When the Flash is
programmed, the debugger can monitor the executable code, halt it, step through it, and monitor the
memory and registers. The executable code is disassembled so that the assembly code can be
examined.
programmed, the debugger can monitor the executable code, halt it, step through it, and monitor the
memory and registers. The executable code is disassembled so that the assembly code can be
examined.
Debugging with source code allows the user to examine the C code that is being executed. This
requires that the source code is available and linked by the debugger to the executable code that is
running on the evaluation board.
requires that the source code is available and linked by the debugger to the executable code that is
running on the evaluation board.
B.6
Building an Executable File From Example Code
1. Launch Code|Lab EDE and open the “Tester321LED” Workspace.
2. Click on “Tester321LED files” in the “File/View” window.
3. Click “Build/Clean”. This deletes the old .o files.
4. Click Build/Rebuild All.
5. When there are errors, carefully go back through
.