Intel MFS5000SI MFS5000SIB User Manual
Product codes
MFS5000SIB
2BFunctional Architecture
Intel® Compute Module MFS5000SI TPS
TP02300
DIMM D2
DIMM D1
DIMM C2
DIMM C1
DIMM B2
DIMM B1
DIMM A2
DIMM A1
Branch 0
MCH
Channel A
Channel B
Channel D
Channel C
Branch 1
Figure 7. Recommended Minimum Two-DIMM Memory Configuration
Note:
The server board supports single DIMM mode operation. Intel only validates and supports this
configuration with a single 512MB x8 FBDIMM installed in DIMM slot A1.
3.1.3.4
Non-mirrored Mode Memory Upgrades
The minimum memory upgrade increment is two DIMMs per branch. The DIMMs must cover the same
slot position on both channels. DIMM pairs must be identical with respect to size, speed, and
organization.
slot position on both channels. DIMM pairs must be identical with respect to size, speed, and
organization.
When adding two DIMMs to the configuration shown in Figure 7, the DIMMs should be populated in
DIMM slots C1 and D1 as shown in the following diagram. Populated DIMM slots are shown in Grey.
DIMM slots C1 and D1 as shown in the following diagram. Populated DIMM slots are shown in Grey.
Revision 1.4
Intel order number: E15154-007
12