Hitachi RAC-25FXA RAC25FXA User Manual
Product codes
RAC25FXA
13-4
•
Applicable model : RAM-90NP5A
•
Applicable model : RAC-25NPA/RAC-35NPA/RAC-
50NPA
50NPA
–
Investigate the power supply capacity and other
electrical conditions at the installation location.
electrical conditions at the installation location.
–
Depending on the model of room air conditioner to be
installed, requiest the customer to make arrangements
for the necessary electrical work etc
installed, requiest the customer to make arrangements
for the necessary electrical work etc
–
The electrical work includes the wiring work up to the
outlet. In localities where electrical conditions are poor,
use of a voltage regulation is recommended
outlet. In localities where electrical conditions are poor,
use of a voltage regulation is recommended
13.2.3 ELECTRICAL WIRING FOR WALL TYPE
INDOOR UNIT
WARNING:
–
–
The appliance must be earthed
–
Remove the front panel and electrical cover to expose
the electrical box in the indoor unit.
the electrical box in the indoor unit.
–
Insert the connecting cord from the bottom of the unit.
–
Fixed the wire firmly to the terminal.
•
Applicable Models :
RAK-18QXA/RAK-25QXA/RAK-35QXA/RAK-50QXA
Pull the cover ① and ②in the directions as shown by
arrows to remove the cover.
arrows to remove the cover.
N C
Connect the
earth cord
earth cord
After remove
the screw and
cover, put the
connecting
cords and fix
the cover with
screw
the screw and
cover, put the
connecting
cords and fix
the cover with
screw
Connect the
earth cord
earth cord
After remove the screw and cover, and
put the connecting cords and fix the
cover with screw
put the connecting cords and fix the
cover with screw
D
C
Earth terminal
L
D