Hitachi 100GB 7200 RPM HTE721010G9SA00 User Manual
Product codes
HTE721010G9SA00
Travelstar E7K100 (Serial ATA) Hard Disk Drive Specification
31
6.9.1.2 Swept sine vibration
6.9.2 Nonoperating vibration
The disk drive withstands the following vibration levels without any loss or permanent damage.
6.9.2.1 Random vibration
The test consists of a random vibration applied in each of three mutually perpendicular axes for a duration of 15
minutes per axis. The PSD levels for the test simulating the shipping and relocation environment is shown below.
minutes per axis. The PSD levels for the test simulating the shipping and relocation environment is shown below.
Note: Overall RMS (root mean square) level of vibration is 29.50 m/sec2 (3.01G)
6.9.2.2 Swept sine vibration
•
49 m/sec2 (5 G) (zero-to-peak), 10 to 500 to 10 Hz sine wave
•
0.5 oct/min sweep rate
•
25.4 mm (peak-to-peak) displacement, 5 to 10 to 5 Hz
6.9.3 Operating shock
The drive meets the following criteria while operating in the conditions described below. The shock test consists of
10 shock inputs in each axis and direction for total of 60. There must be a delay between shock pulses long enough
to allow the drive to complete all necessary error recovery procedures.
10 shock inputs in each axis and direction for total of 60. There must be a delay between shock pulses long enough
to allow the drive to complete all necessary error recovery procedures.
200
4.8 x E-2
500
4.8 x E-2
Swept sine vibration (zero to peak 5 to
500 to 5 Hz sine wave)
500 to 5 Hz sine wave)
Sweep rate (oct/min)
9.8 m/sec2 (1 G) (5-500 Hz)
1.0
Table 19: Random Vibration PSD Profile Breaking points (nonoperating)
Hz
(m2/sec4)/Hz
2.5
0.096
5
2.88
40
1.73
500
1.73
Table 20: Operating shock
Duration of 1 ms
Duration of 2 ms
Duration of 11 ms
1568 m/sec
2
(160 G)
2940 m/sec
2
(300 G)
147 m/sec
2
(15 G)
Table 18: Random vibration PSD profile break points (operating)
Hz
m x 10n (m2/sec4)/Hz