Schneider Electric 66846 User Manual
Network
Management Card
User Manual
Network Management Card
– User Manual
34003676EN/HA
Page
16/81
“Communication”: indicates the status of the communication between the card and the STS
“Output”: indicates whether the output is or not powered
“Output load level”: indicates the power percentage used at STS output
“Transfer”: indicates if it is possible to switch from one used source to the other.
3.2.2.3 “Sources status” zone:
◗
“Active source”: indicate which source is currently used.
Possible values are:
- 1: for source 1
- 2 : for source 2
– Unknow : if value unknown (intialization, lost of communication)
◗
“Prefered source”: indicate which source is used, if none source is faulty
Possible values are:
- 1: for source 1
- 2 : for source 2
– Unknow : if value unknown (intialization, lost of communication)
3.2.3 About
The “About your UPS” or “About your STS” zone provides information on the UPS / STS, in particular, the
name range and software version. Are also available, the current NMC firmware release.