Toshiba 24" Toshiba HD Ready WLAN TV Important Safety Instructions

English   - 21 -

Press the 

Text button to enter. Press again to activate 

mix mode, which allows you to see the teletext page 

and the TV broadcast at the same time. Press once 

more to exit. If available, sections in the teletext pages 

will become colour-coded and can be selected by 

pressing the coloured buttons. Follow the instructions 

displayed on the screen.
Digital Teletext
Press the 

Text button to view digital teletext 

information. Operate it with the coloured buttons, 

cursor buttons and the 

OK button. The operation 

method may differ depending on the contents of the 

digital teletext. Follow the instructions displayed on 

the digital teletext screen. When the 

Text button is 

pressed again, the TV returns to television broadcast.
BBC Connected Red Button (CRB)
While watching BBC channels, press the 

Red button 

to access digital TV services provided by the BBC. 

Under the tab ‘

Featured’ highlight Connected Red 

Button and press OK to start the service. On the 

opening page you can access to BBC’s main services 

such as BBC iPlayer, BBC News, BBC Sport and 

many others. There are also links to the home pages of 

the related applications available. Use the navigation 

buttons on the TV’s remote control to move through 

the application. Press 

Exit button to close and exit.

Your TV is capable of finding and updating the firmware 

automatically via the broadcast signal or via Internet. 

On the main menu select 

System>Settings and then 

More. Navigate to Software upgrade and press the 

OK button. In Upgrade options menu select Scan 

for upgrade and press OK button to check for a new 

software upgrade.
If a new upgrade is found, it starts to download the 

upgrade. After the download is completed, a warning 

will be displayed, press OK button to complete 

software upgrade process and restart TV. 

Your TV will search for new upgrades at 3:00 o’clock if 

Automatic scanning option in the Upgrade options 

menu is set to 

Enabled and if the TV is connected 

to an aerial signal or to Internet. If a new software is 

found and downloaded successfully, it will be installed 

at the next power on. 

Make sure the power cord is plugged in securely to a 

wall outlet. Press the Power button on the TV. 

• Check if you have correctly tuned the TV.
• Low signal level can cause picture distortion. Please 
check antenna connections.
• Check if you have entered the correct channel 

frequency if you have performed manual tuning. 

• TV is not receiving any signal. 
Make sure the correct source has been selected.
• Is the antenna connected properly? 
• Is the antenna cable damaged? 
• Are suitable plugs used to connect the antenna? 
• If you are in doubt, consult your dealer.

• Check if the TV sound is muted. Press the Mute 

button or increase the volume to check.

• Sound is coming from only one speaker. Check the 

balance settings from Sound menu.

• The batteries may be exhausted. Replace the 

batteries.

• The batteries maybe inserted incorrectly. Refer to 

the section "Inserting the Batteries into the Remote". 

• It is possible that no device is connected.
• Check the AV cables and connections from your 

device.

• Check the device is switched on.

To  record  a  programme,  you  should  first  correctly 

connect a USB storage device to your TV, while the 

TV is switched off. You should then switch on the TV 

to enable the recording feature. If you cannot record, 

check the storage device is correctly formatted and 

there is sufficient space.

If a “USB storage device writing speed too slow to 

record” message is displayed on the screen while 

starting a recording, try restarting the recording. If you 

still get the same error, it is possible that your USB 

storage device does not meet the speed requirements. 

Try using a different USB storage device.