Toshiba 49" Toshiba Ultra HD WLAN TV Important Safety Instructions

English   - 12 -

• The transmission speed differs depending on the 

distance and number of obstructions between the 

transmission  products,  the  configuration  of  these

products, the radio wave conditions, the line traffic

and the products that you use. The transmission may 

also be cut off or may get disconnected depending 

on the radio wave conditions, DECT phones or any 

other WiFi 11b appliances. The standard values of 

the transmission speed are the theoretical maximum 

values for the wireless standards. They are not the 

actual speeds of data transmission.

• The location where the transmission is most effective 

differs depending on the usage environment.

• The Wireless feature of the TV supports 802.11 a,b,g 

& n type modems. It is highly recommended that you 

should use the IEEE 802.11n communication protocol 

in order to avoid any possible problems while watching 

videos.

• You must change your modem’s SSID when there are

any other modems around with the same SSID. You 

can encounter connection problems otherwise. Use 

a wired connection if you experience problems with a 

wireless connection. 

Open the 

Network/Internet Settings menu and select 

Network Type as Wireless Device to start connection 

process.
The TV will scan the wireless networks automatically. 

A list of available networks will be displayed. Please 

select your desired network from the list. 

If the selected network is protected with a password, 

please enter the correct key by using the virtual 

keyboard. You can use this keyboard via the directional 
buttons and the 

OK button on the remote control. 

Wait until the IP address is shown on the screen.
This means that the connection is now established. 

To disconnect from a wireless network, highlight 

Network Type and press Left or Right buttons to set 

as 

Disabled.

Highlight 

Internet Speed Test and press the OK button 

to check your internet connection speed. Highlight 

Advanced Settings and press the OK button to open 

the advanced setting menu. Use directional and numeric 

buttons to set. Press the 

OK button to save settings 

when complete. 

The status of the connection will be displayed as 

Connected or Not  Connected and  the current IP 

address, if a connection is established.

• If your mobile device has WiFi feature, you can connect 

it to your TV via a router, in order to access the content 

in your device. For this, your mobile device must have 

an appropriate sharing software.

• Connect to your router following the steps stated above 

in the 

Wireless Connectivity section.

• Afterwards, engage your mobile device with the router 

and then activate the sharing software on your mobile 

device. Then, select files that you want to share with

your TV.

• If the connection is established correctly, you will be 

able to access the shared files from your mobile device

via the 

Media Browser of your TV.

• Enter the 

Media Browser menu and the playback 

device selection OSD will be displayed. Select your 

mobile device and press the 

OK button to continue.

• If available, you can download a virtual remote 

controller application from the server of your mobile 

device application provider. 

Wireless Display is a standard for streaming video and 

sound content by Wi-Fi Alliance. This feature provides 

the ability to use your TV as wireless display device.

There are different standards which enable sharing of 

screens including graphical, video and audio content 

between your mobile device and TV.
Plug the wireless USB dongle to TV first, if the TV

doesn’t have internal WiFi feature.
Then press the 

Source button on the remote and 

switch to 

Wireless Display source. 

A screen appears stating that the TV is ready for 

connection.
Open the sharing application on your mobile device. 

These applications are named differently for each 

brand, please refer to the instruction manual of your 

mobile device for detailed information.
Scan for devices. After you select your TV and 

connect, the screen of your device will be displayed 

on your TV.