Intel express 550t User Manual
500.bok : 50003 59 Fri Sep 11 14:52:16 1998
59
C H A P T E R 3
Standard Configuration
Port Mode
Disabling the port
If you disable the port, the devices attached to it cannot use the
switch. The MAC address of those devices are removed from the
switch’s address table. If those addresses are defined as permanent
entries, they are not purged but are unable to use the switch. To dis-
able the port:
switch. The MAC address of those devices are removed from the
switch’s address table. If those addresses are defined as permanent
entries, they are not purged but are unable to use the switch. To dis-
able the port:
1
Click the port you want to disable.
2
Select
Port Setup
.
3
Click
Port Mode
.
4
Click
Enable Port
.
If there is a check mark in the box, the port is operational. If
the box is empty, the port is disabled.
the box is empty, the port is disabled.
5
Click
OK
.
Disabling auto-negotiation
To disable auto-negotiation, and reset the speed to the values speci-
fied in
fied in
Speed
:
1
Click the port you want to disable auto-negotiation.
2
Select
Port Setup
.
3
Click
Port Mode
.
4
Click
Enable Auto-negotiation
.
If there is a check mark in the box, the port automatically
detects the line-speed and duplex setting. If the box is empty,
auto-negotiation is disabled and the port uses the values speci-
fied in
detects the line-speed and duplex setting. If the box is empty,
auto-negotiation is disabled and the port uses the values speci-
fied in
Duplex
and
Speed
.
5
Click
OK
.