Intel express 550t User Manual
500.bok : 50002 22 Fri Sep 11 14:52:16 1998
C H A P T E R 2
Intel Device View
22
Tools menu
The Tools menu has the following commands:
•
Ping — sends ICMP echo packets to the switch. Can also be
accessed by selecting
accessed by selecting
.
•
A Report Manager — uploads reports, logs and the parameter
block from the switch. Can also be accessed by selecting
.
•
A Recovery Manager — regains control of your switch if you
have lost contact. This is described in “Recovery Manager”, p.
105.
have lost contact. This is described in “Recovery Manager”, p.
105.
•
A DNS-IP conversion tool converts DNS names to IP addresses.
These are described in detail, together with switch specific tools, in
the Chapter “Managing the Switch”, p. 77.
the Chapter “Managing the Switch”, p. 77.
Help menu
The Help menu has the following commands for the switch:
•
then clicking on the feature of interest
•
Help for switch specific topics.
After a Switch or Stack is Contacted
Commands
When Intel Device View contacts a switch, the basic commands are
supplemented with:
supplemented with:
•
Local Management access — provides Telnet access to monitor-
ing functions embedded in the switch.
ing functions embedded in the switch.
•
RMON facility — gathers information about the network traffic,
monitors traffic on subnets and enables you to define alarms on
the individual ports.
monitors traffic on subnets and enables you to define alarms on
the individual ports.
•
Stack Synchronization Manager (for stacks only) — enables you
to establish a stack from a group of switches connected via a
Matrix Module, or add a switch to an existing stack and then syn-
chronize their configurations.
to establish a stack from a group of switches connected via a
Matrix Module, or add a switch to an existing stack and then syn-
chronize their configurations.
•
Switch Position Organizer (for stacks only) — enables you to
move the switches displayed on screen around in the stack.
move the switches displayed on screen around in the stack.
•
Color Code Matrix Ports (for stacks only) — colors the individ-
ual ports on the Matrix Module. This simplifies the task of trac-
ing cables, as the ports on the Stack Interface Modules become
the same color as the corresponding Matrix Module port.
ual ports on the Matrix Module. This simplifies the task of trac-
ing cables, as the ports on the Stack Interface Modules become
the same color as the corresponding Matrix Module port.